文档中心
新框源装裱设备技术文档、工程报告与参考资料，涵盖相框制造机械与框条材料。
相框制造设备完整指南
装裱车间设备全景：切角、钉角、组装与自动化 — 如何按日产量匹配机械配置。
钉角机与相框拼装机：如何选型？
对比气动钉角机与 CNC 相框拼装机 — 产能、基材适用性及四角自动钉角时机。
双头斜切锯与堆叠切角机布局指南
相框工厂斜切锯、堆叠切角机与双头切角产线的车间布局与工艺流程。
V-Nail Sizing & Underpinner Settings by Moulding Profile
Map V-nail leg length, stack height, and pneumatic pressure to wood, MDF, and aluminium frame profiles.
Automating Picture Frame Production: ROI & Workflow
Throughput math, labour redeployment, and a phased automation path for framing factories.
CE & Safety Compliance for Framing Machinery (EU/US)
Guards, interlocks, CE marking, and documentation buyers expect on exported cutting and joining equipment.
Sourcing Framing Equipment from China: OEM Buyer Guide
RFQ structure, factory audit signals, incoterms, and spare-parts planning for imported framing machinery.
NN300 Installation & Commissioning Guide
On-site NN300 quad-corner underpinner setup — safety, fixtures, V-nail loading, XINJE HMI commissioning, and trial-run acceptance.
NC500 Installation & Commissioning Guide
NC500 stack cutter installation — leveling, pneumatic cylinder, press plate, dust collection, trial run, and troubleshooting.
NN300 Mechanical Installation Setup
NN300 power-on, four-station fixtures, magazine height, nail dies, and V-nail loading.
NN300 HMI Length & Width Commissioning
XINJE HMI parameter adjustment, Set Length/Set Width, clearance check, and nailing row setup.
NN300 Trial Run & Acceptance
NN300 IO detections, start sequence, acceptance criteria, and optional collector/conveyor.
NC500 Mechanical Installation (Steps 1–14)
NC500 mechanical assembly from leveling through ball screw, final tightening, and appearance check.
NC500 Control Panel, Trial Run & Maintenance
NC500 HMI operation, trial run acceptance, maintenance intervals, and troubleshooting.
相框组装工程
相框组装流程技术报告：V 型钉紧固、玻璃装裱及 XKY 切角/钉角设备。
现代相框框条工程
实木、MDF 与 PS 发泡框条工程研究 — 材料特性、成型工艺与下游切角钉角。
相框组装工程
相框组装流程技术报告：V 型钉紧固、玻璃装裱及 XKY 切角/钉角设备。
现代相框框条工程
实木、MDF 与 PS 发泡框条工程研究 — 材料特性、成型工艺与下游切角钉角。